Each typedef has specific routines that manipulate the various data type.
Perl also uses a special typedef I32 which will always be a 32-bit integer.
The four routines are:
To change the value of an *already-existing* scalar, there are five routines:
Notice that you can choose to specify the length of the string to be assigned by using sv_setpvn , or allow Perl to calculate the length by using sv_setpv . Be warned, though, that sv_setpv determines the string's length by using strlen , which depends on the string terminating with a NUL character.
To access the actual value that an SV points to, you can use the macros:
which will automatically coerce the actual scalar type into an IV, double, or string.
In the SvPV macro, the length of the string returned is placed into the variable len (this is a macro, so you do not use &len ). If you do not care what the length of the data is, use the global variable na . Remember, however, that Perl allows arbitrary strings of data that may both contain NUL's and not be terminated by a NUL.
If you simply want to know if the scalar value is TRUE, you can use:
Although Perl will automatically grow strings for you, if you need to force Perl to allocate more memory for your SV, you can use the macro
which will determine if more memory needs to be allocated. If so, it will call the function sv_grow . Note that SvGROW can only increase, not decrease, the allocated memory of an SV.
If you have an SV and want to know what kind of data Perl thinks is stored in it, you can use the following macros to check the type of SV you have.
You can get and set the current length of the string stored in an SV with the following macros:
But note that these are valid only if SvPOK() is true.
If you know the name of a scalar variable, you can get a pointer to its SV by using the following:
This returns NULL if the variable does not exist.
If you want to know if this variable (or any other SV) is actually defined, you can call:
The scalar undef value is stored in an SV instance called sv_undef . Its address can be used whenever an SV* is needed.
There are also the two values sv_yes and sv_no , which contain Boolean TRUE and FALSE values, respectively. Like sv_undef , their addresses can be used whenever an SV* is needed.
Do not be fooled into thinking that (SV *) 0 is the same as &sv_undef . Take this code:
This code tries to return a new SV (which contains the value 42) if it should return a real value, or undef otherwise. Instead it has returned a null pointer which, somewhere down the line, will cause a segmentation violation, or just weird results. Change the zero to &sv_undef in the first line and all will be well.
To free an SV that you've created, call SvREFCNT_dec(SV*) . Normally this call is not necessary. See the section on MORTALITY .
If you really need to know if you have an integer, double, or string pointer in an SV, you can use the following three macros instead:
These will tell you if you truly have an integer, double, or string pointer stored in your SV.
In general, though, it's best to just use the Sv[INP]V macros.
The second method both creates the AV and initially populates it with SV's:
The second argument points to an array containing num SV* 's.
Once the AV has been created, the following operations are possible on AV's:
These should be familiar operations, with the exception of av_unshift . This routine adds num elements at the front of the array with the undef value. You must then use av_store (described below) to assign values to these new elements.
Here are some other functions:
If you know the name of an array variable, you can get a pointer to its AV by using the following:
This returns NULL if the variable does not exist.
Once the HV has been created, the following operations are possible on HV's:
The klen parameter is the length of the key being passed in. The val argument contains the SV pointer to the scalar being stored, and hash is the pre-computed hash value (zero if you want hv_store to calculate it for you). The lval parameter indicates whether this fetch is actually a part of a store operation.
Remember that hv_store and hv_fetch return SV** 's and not just SV* . In order to access the scalar value, you must first dereference the return value. However, you should check to make sure that the return value is not NULL before dereferencing it.
These two functions check if a hash table entry exists, and deletes it.
And more miscellaneous functions:
If you know the name of a hash variable, you can get a pointer to its HV by using the following:
This returns NULL if the variable does not exist.
The hash algorithm, for those who are interested, is:
To create a reference, use the following command:
Once you have a reference, you can use the following macro with a cast to the appropriate typedef (SV, AV, HV):
then call the appropriate routines, casting the returned SV* to either an AV* or HV* .
To determine, after dereferencing a reference, if you still have a reference, you can use the following macro:
The stack arguments are accessible through the ST(n) macro, which returns the n 'th stack argument. Argument 0 is the first argument passed in the Perl subroutine call. These arguments are SV* , and can be used anywhere an SV* is used.
Most of the time, output from the C routine can be handled through use of the RETVAL and OUTPUT directives. However, there are some cases where the argument stack is not already long enough to handle all the return values. An example is the POSIX tzname() call, which takes no arguments, but returns two, the local timezone's standard and summer time abbreviations.
To handle this situation, the PPCODE directive is used and the stack is extended using the macro:
where sp is the stack pointer, and num is the number of elements the stack should be extended by.
Now that there is room on the stack, values can be pushed on it using the macros to push IV's, doubles, strings, and SV pointers respectively:
And now the Perl program calling tzname , the two values will be assigned as in:
An alternate (and possibly simpler) method to pushing values on the stack is to use the macros:
These macros automatically adjust the stack for you, if needed.
In the above example with tzname , we needed to create two new SV's to push onto the argument stack, that being the two strings. However, we don't want these new SV's to stick around forever because they will eventually be copied into the SV's that hold the two scalar variables.
An SV (or AV or HV) that is "mortal" acts in all ways as a normal "immortal" SV, AV, or HV, but is only valid in the "current context". When the Perl interpreter leaves the current context, the mortal SV, AV, or HV is automatically freed. Generally the "current context" means a single Perl statement.
To create a mortal variable, use the functions:
The first call creates a mortal SV, the second converts an existing SV to a mortal SV, the third creates a mortal copy of an existing SV.
The mortal routines are not just for SV's -- AV's and HV's can be made mortal by passing their address (and casting them to SV* ) to the sv_2mortal or sv_mortalcopy routines.
Notice the use of TRUE as the second parameter. The new variable can now be set, using the routines appropriate to the data type.
Perl stores various stashes in a GV structure (for global variable) but represents them with an HV structure.
To get the HV pointer for a particular package, use the function:
The first function takes a literal string, the second uses the string stored in the SV.
The name that gv_stash*v wants is the name of the package whose symbol table you want. The default package is called main . If you have multiply nested packages, it is legal to pass their names to gv_stash*v , separated by :: as in the Perl language itself.
Alternately, if you have an SV that is a blessed reference, you can find out the stash pointer by using:
then use the following to get the package name itself:
If you need to return a blessed value to your Perl script, you can use the following function:
where the first argument, an SV* , must be a reference, and the second argument is a stash. The returned SV* can now be used in the same way as any other SV.
Some scalar variables contain more than one type of scalar data. For example, the variable $! contains either the numeric value of errno or its string equivalent from sys_errlist[] .
To force multiple data values into an SV, you must do two things: use the sv_set*v routines to add the additional scalar type, then set a flag so that Perl will believe it contains more than one type of data. The four macros to set the flags are:
The particular macro you must use depends on which sv_set*v routine you called first. This is because every sv_set*v routine turns on only the bit for the particular type of data being set, and turns off all the rest.
For example, to create a new Perl variable called "dberror" that contains both the numeric and descriptive string error values, you could use the following code:
If the order of sv_setiv and sv_setpv had been reversed, then the macro SvPOK_on would need to be called instead of SvIOK_on .
The routine most often used should be perl_call_sv . The SV* argument contains either the name of the Perl subroutine to be called, or a reference to the subroutine. The second argument tells the appropriate routine what, if any, variables are being returned by the Perl subroutine.
All four routines return the number of arguments that the subroutine returned on the Perl stack.
When using these four routines, the programmer must manipulate the Perl stack. These include the following macros and functions:
For more information, consult the perlcall manpage .
With lots of help and suggestions from Dean Roehrich, Malcolm Beattie, Andreas Koenig, Paul Hudson, Ilya Zakharevich, Paul Marquess, and Neil Bowers.